Double Yellow Reflective High-Intensity Prismatic Plastic Road Stud for Urban Roads & Highways Ground Mount

• Customization: Available
• Type: Plastic Road Stud
• Application: Road
• Model NO.: SLE-RS01
• Reflectors: Reflector
• Number of Reflective Surfaces: Double-Side
• Certification: CE, Mutcd
• Logo: Can Be Customized
• Application Place: Road Safety
• Transport Package: Cartons
• Specification: 100CM
• Trademark: SLOAN
• Origin: China
• HS Code: 3926909090
• Production Capacity: 1000 PCS Per Day
• Package Size: 98.00cm * 53.00cm * 26.00cm
• Package Gross Weight: 12.000kg

Product Description

Plastic Road Stud from Sloan Safety

Ensure road safety in all conditions with our High-Performance Plastic Road Stud. Engineered with high-brightness reflective sheeting and durable ABS material, it withstands heavy loads up to 16 tons. Enhance visibility, prevent accidents, and install easily. Learn more about its certified features and durable design for long-term traffic safety solutions.

Specification

Specification for this solar road stud

1. Material & Construction

Housing: 100% pure ABS plastic, engineered for durability
Reflective surface: High-brightness, prismatic reflective sheeting in diamond lattice pattern
2. Physical & Mechanical Properties

Load capacity: Up to 16 tons
Compression resistance: Reinforced bar-shaped base design
Weight: Lightweight for easy handling and installation
3. Optical Performance

Pattern: High-density diamond retroreflective layout
Day/Night visibility: High contrast and long-distance conspicuity
4. Environmental & Chemical Resistance

Waterproof and oil resistant
Resistant to common road chemicals and UV radiation
5. Installation & Compatibility

Pre-molded holes for screw fixing (spike/base options available)
Suitable for asphalt, concrete, and composite road surfaces
Tool compatibility: Standard road stud installation tools

Product Description

Detail decription for this road stud

In low-light conditions, adverse weather, or high-traffic areas, maintaining clear lane guidance is critical to driver safety. Our Heavy-Duty Plastic Road Stud is designed to deliver reliable, long-lasting visibility and physical resilience, making it an essential component of modern road marking systems.

Installation steps

INSTALLATION STEPS – Solar Road Stud
STEP 1: Position Marking
Mark the installation positions on the road surface according to the lane layout.
Recommended spacing: about 3 meters between each stud.

STEP 2: Mix the Epoxy
Mix Part A and Part B epoxy adhesive in a 1:1 ratio.
Stir thoroughly until fully blended. Each stud requires approximately 40–50 g of mixed epoxy.

STEP 3: Surface Cleaning
Clean the marked installation area carefully to remove dust, dirt, oil, and loose materials.
Ensure the surface is dry and flat before installation.

STEP 4: Fix the Road Stud
Apply the mixed epoxy evenly to the bottom of the solar road stud.
Place it onto the marked position, press firmly, and hold briefly to secure alignment.

STEP 5: Clean Excess Adhesive
Remove any excess epoxy around the stud using a scraper or knife.
Keep the road surface clean and smooth.

STEP 6: Curing & Activation
Allow the epoxy to cure for at least 8 hours before opening to traffic.
After curing, the solar road stud will charge automatically during the day and illuminate at night.

Application scene for this Road Stud

Highways & Expressways
Urban Roads & City Streets
Intersections & Curves
Lane Dividers & Medians
Parking Lots & Garages
Tunnels & Bridges
Toll Stations
Construction & Work Zones

Packing & Delivery

Company Profile

FAQ